HORMIPERLITA

Hormiperlita is a light mortar made from a mixture of cement, perlite and additives to which only water needs to be added for pouring.


FORMAT:
Hormiperlita is supplied in 25-litre bags (40 bags = 1 metre cubed).


ADVANTAGES:

  1. Constant dosage; the cement - sand ratio does not change since it is a product that is produced and mixed industrially.

  2. Does not lose stability over time.

  3. Light, easy to transport and handle.


APPLICATIONS:

  1. Formation of slopes on terraces. Does not require a compression sheet to lay asphalt fabric.

  2. Light floor fillers.

  3. Heat insulation between floors.

  4. Vault fillers.


POURING:

  1. The surface should be dust- and grease-free.

  2. When applying manually, mix in a cement mixer by firstly adding the mixing water and then the Hormiperlita. The mixing time is from 2 to 3 minutes. Next, pour and smooth out the mortar.

  3. When applying using a mechanical method, helicoidal pumps should be used which transport the mortar in its wet state (Putzmeister)

  4. In this case, a volume reduction of around 15% should be taken into account.

  5. Hormiperlita becomes traffic-bearing 48 hours after it has been applied.

    Density .................................................... 540 Kg / m3
    Heat conductibility Kcal/mh degrees .............. 0,092
    Resistance to compression Kg/cm2 .................... 12
    Water vapour permeability .................................. 9,8
    pH .......................................................................... 12


HORMIPERLITA cannot be applied at temperatures below 5 degrees.
Does not suffer changes during storage provided that it is protected from humidity.